CUBE® Micro Station User Guide

Rotating the Front Door

Tools Required

  • Power Drill with Philips head bit

Step-By-Step

  1. Unlock and open the CUBE Micro Station.
  2. Using a power drill with Philips head bit, locate and remove the three (3) screws that secure the door in place.
  3. Flip the door 180-degrees.
  4. Carefully, line up the three (3) holes in the hinge with the three (3) pre-drilled holes on the opposite side of the CUBE Micro Station.
  5. Applying pressure, carefully tighten the self-tapping screws into the CUBE Micro Station housing.