EVER Cart User Guide

Wiring the MiX Module



  1. Remove the MiX module from the cart.
  2. Set the MiX module on a comfortable work surface.
  3. Route the AC power cable between the divider release clips (as pictured above) and under the elastic bands at the front and rear of the module so it lays loosely across the top of the MiX module.
  4. Feed the computer plug from the AC adapter cable behind the slot number plate.
  5. Plug the adapter into the rear of the MiX module.
  6. Wrap up the remaining cable and tuck the AC adapter into the bin at the back of the MiX module.
  7. Repeat this process for each of your AC adapters until you've finished cabling the MiX module.
  8. Reinsert the MiX module inside the EVER Cart.